• Glass polish to remove and polish fine scratches on glass panes and mirrors, ready to use, liquid glass polish, apply to felt wheel and start polishing.
• Content: 100 grams

• Glass polish to remove and polish fine scratches on glass panes and mirrors, ready to use, liquid glass polish, apply to felt wheel and start polishing.
• Content: 1200 grams

• The Glass polish is a high grade optical polishing compound used to remove and polish scratches from mirror bevels, table top edges, television face plates, glass in vehicles or structures. The Glass polish is mixed with water to form a paste or slurry. This compound has excellent suspension qualities and will not harden.
• Content: 450 grams

• The Glass polish is a high grade optical polishing compound used to remove and polish scratches from mirror bevels, table top edges, television face plates, glass in vehicles or structures. The Glass polish is mixed with water to form a paste or slurry. This compound has excellent suspension qualities and will not harden.
• Contents: 1000 g

• The Glass polish is a high grade optical polishing compound used to remove and polish scratches from mirror bevels, table top edges, television face plates, glass in vehicles or structures. The Glass polish is mixed with water to form a paste or slurry. This compound has excellent suspension qualities and will not harden.
• Content: 2,27 kg

• The Glass polish is a high grade optical polishing compound used to remove and polish scratches from mirror bevels, table top edges, television face plates, glass in vehicles or structures. The Cerium Oxide is mixed with water to form a paste or slurry. This compound has excellent suspension qualities and will not harden.
• Contents: 4.54 kg

• This Glass polish is used for removing deep scratches and scuff marks that do not require heavy grinding. Often referred to as cerium oxide but in reality, it is a mixture of abrasives which would be considered a high purity cerium mixture. Each bag is enough to fill one slurry container.
• Contents: 397g

• Glass polish is the same powder supplied with the SRP Scratch Removal System. It is used with the fining part of this system for removing deep scratches, graffiti and scuff marks that require heavy grinding before the polishing stage. The average particle size is 9 microns, which is coarser than the standard SRP polishing compound. After using the finer system and compound, the glass appears to be frosted. Then the polisher is used to "smooth" out the glass surface. Each bag contains enough material to fill one slurry container.
• Contents: 397g

• Plastic polish remove not only filth and dust but also small scratches of the surface that has originated through wrong cleaning.

• Plastic polish removes heavy scratches and abrasions from most acrylic surfaces. Polishes contain a light abrasive and are not for use on eyeglasses, polycarbonates or coated plastics.To fine polisch ist > PN7030 required.

• Plastic polish removes fine scratches, haziness and abrasion from most plastic surfaces. It is not just a surface cover up, but will restore and protect.

• Felt Polishing Wheel ø 80 mm, 30 mm thick, with glued-in shaft ø 6 mm, for removing small scratches or "blind" areas on glass in connection with polishing compound.

• Felt Polishing Wheel with velcro, Ø 100 mm, for removing small scratches or "blind" areas on glass in connection with polishing compound.

• Felt Polishing Wheel with velcro, Ø 115 mm, for removing small scratches or "blind" areas on glass in connection with polishing compound.

• Flex Glass Polisher for removing scratches, cloudy areas or stubborn dirt from glass surfaces. For use with polishing powder or Velox Polisan glass polishing compound. Super-slim body, high torque motor, light weight and a practical handle. It makes glass polishing convenient and easy. The accelerator switch and speed pre-selection allow controlled acceleration to the optimum speed. FLEX sixfold microprocessor electronics: with speed stabilisation, soft start with accelerator switch, start-up lock, overload protection, temperature monitor and speed pre-selection · High performance motor: heavy duty · spindle catch · quality switch-off brushes protect the motor when the brushes are worn · 4-m mains cable: with flex-red plug · standard equipment includes felt disc D=125 mm.

• Easily and invisibly removes surface scratches from glass, removes scratches from flat as well as curved glass, both convex and concave, almost without water, no distortions in the glass, saves money, since window panes don't need to be removed or transported.
• Technical data:

Power consumption: 150 W
Adjustable speed: 5000 - 9500 rpm
Polishing disc: ø 45 mm
Insulation / safety according to: EN50144 / HD 400.1 and HD 400.2
Weight: 1.5 kg
Includes

SAW, electric model in carrying case · 5 polishing discs · 2 sponges · 1 felt-tip marker · 1 magnifying glass · instruction manual.

• Easily and invisibly removes surface scratches from glass, suitable for the automotive industry, furniture industry (glass table tops), sanitary facilities (mirrors and shower stalls) etc., simple to use with polishing disc.
• Connection information:

Air tool: 1/4" connection
Air hose: 1/4" connection
Compressor:optimum pressure 6-7 bar

• Technical data:

Air consumption: 280 litre/min.
Speed: 11,000 rpm
Weight: 750 g

Includes

SAW, pneumatic, in carrying case · 5 polishing discs · 2 sponges · 1 felt-tip marker · 1 magnifying glass · instruction manual.

• The transport case contains all necessary tools and materials for glass repair:
  FLEX manual grinding machine 230 V with variable speed (1200 - 3200 rpm) · support plate ø 125 mm with M 14 thread · 2 rubber support pads ø 125 mm with M 14 thread · spray bottle with atomizer · 1 bottle of glass polishing compound (1 litre) for removing corrosion and deposits · 25 each of the following grinding discs: grit A 35 (green), A 10 (blue), A 5 (brown) · 25 polishing discs (white) detailed instruction manual.